Skip to content
Truth Veteran
Desert Storm veteran polo in Sport Grey

Desert Storm veteran polo

$36.00
Size: Select a size
Size guide

Apparel Size Guide

Finding the right apparel fit

Truth Veteran apparel is manufactured on demand specifically for you upon purchase. Because each item is produced individually, our store does not process exchanges or returns for incorrect size selection, as detailed in our returns policy.

To ensure your shirt fits comfortably, we recommend measuring a favorite t-shirt from your wardrobe laid flat on a table, and comparing those numbers to the manufacturer specifications provided below.

Comfort Colors 1717 unisex heavyweight tee

Our graphic t-shirts are printed on the authentic Comfort Colors 1717 garment-dyed heavyweight tee. Crafted from 100% ring-spun cotton with a fabric weight of 6.1 oz/yd² (206.8 g/m²), this shirt offers a relaxed fit with a 7/8″ double-needle topstitched collar, twill-taped neck and shoulders for extra durability, and double-needle armhole, sleeve, and bottom hems. Garment-dyeing gives the fabric a vintage look and soft feel.

The table below lists the official manufacturer measurements from the Comfort Colors (Gildan Activewear) published garment specification sheet for Model 1717:

SizeChest Width (Flat)Body Length (HPS)Width (Metric)Length (Metric)
S18.25 in26.63 in46 cm68 cm
M20.25 in28.00 in51 cm71 cm
L22.00 in29.38 in56 cm75 cm
XL24.00 in30.75 in61 cm78 cm
2XL26.00 in31.63 in66 cm80 cm
3XL27.75 in32.50 in70 cm83 cm

Source citation: Comfort Colors Model 1717 Adult Tee Technical Specification Sheet published by Gildan Activewear SRL.

How to measure your shirt

  • Chest Width: Measure flat across the front of the shirt from seam to seam, approximately one inch below the armhole seam. Double this number if calculating full chest circumference.
  • Body Length: Measure from the highest point of the shoulder seam (where the collar meets the shoulder) straight down to the bottom edge of the hemline.
  • Fit Note: The Comfort Colors 1717 is cut in a relaxed, classic American fit. Because garments undergo a garment-dye washing process during manufacturing, industry-standard variations of up to plus or minus one inch can occur across production lots.

Embroidered hats and caps

Our embroidered veteran caps are produced on two classic adjustable Yupoong silhouettes:

  • Classic Dad Hat (Yupoong 6245CM): Unstructured, 6-panel, low-profile cap with 6 embroidered eyelets, a 3 ⅛″ (7.6 cm) crown, and an adjustable strap with an antique buckle. Made from 100% chino cotton twill.
  • Retro Trucker Hat (Yupoong 6606): Structured, 6-panel, mid-profile cap with a low-profile embroidery area, hard buckram front panels, mesh back, a 3.5″ (8.9 cm) crown, a Permacurv® visor with matching undervisor, and a plastic adjustable closure. Fabric composition is 60% cotton, 40% polyester (or 74% polyester, 26% cotton depending on color and available stock).
  • Circumference: One-size-fits-most adjustable sizing; the Yupoong 6606 trucker hat fits head circumferences from 21⅝″ to 23⅝″ (54.9 cm to 60 cm); and the Yupoong 6245CM dad hat fits about 20½″ to 24⅜″ (52 cm to 62 cm).
  • Design: Typographic front embroidery without service-branch names, seals, insignia, unit patches, flags, or medals.

Garment care recommendations

To preserve the vibrant pigment of garment-dyed cotton and protect printed artwork over time, follow these garment care practices:

  • Machine wash cold with like colors, inside out, using mild detergent.
  • Tumble dry on low heat or hang dry to preserve garment shape and minimize shrinkage.
  • Do not iron directly over printed typography or embroidered thread.
  • Avoid chlorine bleach or harsh stain removers that can strip garment-dyed pigments.

For delivery timelines or order questions, consult our shipping policy or reach out via our contact page.

Color: Sport Grey

Made to order, ships in about a week

Select options to continue.

Arrives about Nov 9 - Nov 16

Made to order in 2–5 business days, plus 3–5 business days US transit.

$4.99 shipping, free over $60

Misprint or damaged? Replaced free within 30 days. Read our returns policy and shipping guide.

This design on other products

Same artwork printed or embroidered across other product types.

About this design

A Desert Storm veteran hat and shirt honoring the 1991 Persian Gulf liberation campaign, embroidered on caps and printed on tees and mugs.

This design reads DESERT STORM VETERAN in clean capital lettering, naming the 1991 coalition campaign that liberated Kuwait. Following the five-month Operation Desert Shield buildup that began in August 1990, the air campaign launched in January 1991 and the ground offensive concluded in one hundred hours that February. While the broader Gulf War period remains open in federal law, many who deployed in 1990 and 1991 prefer the specific campaign name they served under.

It is made for anyone who deployed to the Southwest Asia theater during the 1991 conflict, whether on the ground, in the air, or at sea. Because the artwork avoids unit patches, campaign medals, and service branch emblems, it speaks for every veteran of the operation without claiming official agency endorsement. That makes it a practical choice for Father's Day, Veterans Day, milestone birthdays, or unit reunions when family members want to recognize a relative's exact era.

Our caps, beanies, and polos are stitched with direct embroidery so the lettering holds up to regular wear. The tees, long-sleeve shirts, hoodies, ceramic mugs, and vinyl stickers are crisp-printed to order for everyday use.

Details

Material
100% ring-spun cotton pique, OEKO-TEX Standard 100 certified
Weight
5.2 oz/yd² (176 g/m²)
Fit and construction
Semi-fitted, side-seamed, placket with dyed-to-match buttons
Sizes
S, M, L, XL, 2XL, and 3XL
Print method
Embroidery on the left chest

These specifications come from Printful, the print partner that produces and ships this item.

Size and fit

Runs S, M, L, XL, 2XL, and 3XL. Measure a shirt you already own and compare it to the numbers in the size guide before you order.

See the full size guide and measurement chart

Shipping and returns

  • Production takes 2–5 business days, then US transit takes 3–5 business days.
  • Shipping is a flat $4.99 per order, and orders over $60 ship free.
  • Every order is made for you after checkout, so it cannot be cancelled once production starts.

Frequently asked questions

What is the polo made of?

100% ring-spun cotton pique, OEKO-TEX Standard 100 certified. Weight: 5.2 oz/yd² (176 g/m²).

How does the polo fit?

Semi-fitted, side-seamed, placket with dyed-to-match buttons. Available sizes: S, M, L, XL, 2XL, and 3XL.

How is the design applied?

Embroidery on the left chest on the left chest. Each item is produced after you order, so the artwork is applied to your piece rather than pulled from stock.

What colors can I choose from?

This listing offers 4 colors: Sport Grey, Black, Navy, and White. The color menu above shows what is in stock at this moment.

When will my order ship?

Production takes 2–5 business days, then US transit takes 3–5 business days. Shipping is a flat $4.99 per order, and orders over $60 ship free. Every order is made for you after checkout, so it cannot be cancelled once production starts.

Can I return or exchange it?

Every item is made to order, so we cannot take returns or exchanges for a change of mind or the wrong size. If yours arrives damaged, misprinted, or defective, contact us within 30 days of delivery and we will arrange a free reprint or a refund.

What were the official dates of Operation Desert Storm?

Operation Desert Storm, the combat phase of the Gulf War, ran from the start of the coalition air campaign on January 17, 1991, to the ceasefire on February 28, 1991. It followed Operation Desert Shield, the buildup that began in August 1990. For broader VA wartime benefit eligibility under 38 CFR § 3.2(i), the Persian Gulf War period began on August 2, 1990.

Does this Desert Storm veteran design use official campaign medals or branch insignia?

No. This Desert Storm veteran design uses clean capital lettering without campaign ribbons, service seals, or military branch marks, which are regulated by the Department of Defense under 10 U.S.C. § 2260 and DoD Instruction 5535.12.

Related products